Recalls & faults: GWM Tank 300 (2022-on)

Recalls: GWM Tank 300

Overview

Recalls are issued for defects or faults which have the potential to cause injury. Manufacturers or importers seek to inform the original buyer if their vehicle is subject to a recall and of the steps required to remedy the defect or fault. However, manufacturers or importers may not have the contact details of subsequent owners. Please note that the recalls below are for Australian-delivered vehicles only. Furthermore, the number of recalls should not be taken as an indication of a model’s reliability or its safety more generally.

Recalls: GWM Tank 300

2023 GWM Tank 300 HEV: adjusting rod for vehicle jack did not meet specifications

In July 2024, recall campaign 88242C2 was issued for 2023 GWM Tank 300 HEV vehicles. For these vehicles, the adjusting rod used to operate the vehicle jack was of incorrect specification and may not function as intended. As such, vehicles may not be compliant with Australian Standard AS 2693-2007 and the jack could not be used to remove the vehicle’s wheels. To fix, a GWM dealer was to replace the vehicle jack adjusting rod. In the event of a tyre failure whilst driving prior to the rectification work being conduct, owners were advised to contact the GWM roadside assistance service. For the VINs of the recalled vehicles, please see REC-006024.

2025 GWM Tank 300 HEV: shielding ring in high voltage wiring harness not properly grounded

In December 2025, recall campaign 8825BC9 was issued for 2025 GWM Tank 300 HEV vehicles. Due to a manufacturing defect, the shielding ring in the high-voltage wiring harness may not have been properly grounded. This could reduce the effectiveness of the electromagnetic shielding, which may cause abnormal communications between the engine and transmission control systems. As a result, warning lights may illuminate, vehicle torque may have be reduced, and cooling performance of the hybrid system may be affected. Reduced vehicle performance and cooling operation could increase the risk of a collision and injury to vehicle occupants and other road users. For the VINs of the recalled vehicles, please see REC-006516.

Problems and faults: GWM Tank 300

Overview

This section identifies potential problems, causes and fixes based on the experiences of owners and repairers, online sources and technical service bulletins. This information is provided solely for reference purposes and AustralianCar.Reviews recommends that only properly qualified persons carry out repairs or modifications. Furthermore, the number of items below should not be taken as an indicator of a model’s reliability or the frequency with which they may occur.

To report a problem or fault to the AustralianCar.Reviews team, please use the Contact Us form. Note that AustralianCar.Reviews does not offer advice on automotive problems or disputes; such enquiries will not receive a reply. For vehicles purchased from dealers after 1 January 2011, please see our Australian Consumer Law fact sheet.